Automatic Cooking - CDA HN7242FR Installation, Use And Maintenance Manual

Table of Contents

Advertisement

 To stop the cooking time
Action
To select « Timer »
To stop the « Timer »
If both zones are being timed then you must repeat this operation.
 Automatic stop at the end of the cooking time
 As soon as the selected cooking time is finished the timer displays flashes [ 00 ] and an
acoustic signal sounds.
 To stop the sound and the display simply press key [
 Egg timer function
Action
Activate the hob
To select « Timer »
Decrease the time
Increase the time
After a few seconds the control light stops pulsating and the timer starts.
 To stop the egg timer function
Action
Activate the hob
To stop the « Timer »

Automatic cooking

All the cooking zones are equipped with an automatic "go and stop" cooking device. The
cooking zone starts at full power for a certain time, then reduces power automatically to the
preselected level.
 Start-up
Action
Set power to 9
Automatic cooking
Set desired power level
(for example « 7 »)
 Switching off the automatic cooking
Action
Zone selection
Power level selection
Control panel
Press key [
]
Press key [ - ] then [
Control panel
Press key [
]
Press key [
]
Press key [ - ]
Press key [ + ]
Control panel
Press key [
]
Press key [ - ] then [
Control panel
Press key [ + ]
Press key [ + ]
Press key [ - ]
Control panel
Press key [ - ]
Press key [ + ]
10
Display
The remaining time
]
Displays [ 00 ] then stops
].
Display
The zone control lights are on
[ 00 ] minutes
-1 minute
+1 minute
Display
Timer light blinking
]
Displays [ 00 ] then stops
Display
[ 4 ] to [ 9 ]
[ 9 ] is blinking with [ A ]
[ 9 ] [ 8 ] [ 7 ] ...
[ 7 ] is blinking with [ A ]
Display
[ 9 ] [ 8 ] [ 7 ] ...
Level selected

Advertisement

Table of Contents
loading

Table of Contents