System Requirement - JVC DLA-X770R Instructions Manual

System Requirement

To make use of this software, your hardware and software must meet the following specifications.
PC (Computer)
OS supported
Memory
HDD
Required functions
*1 When using Windows 8 and Windows 10, install .NET Framework 3.5 SP1 or enable the function from the Control
Panel. For details on how to install, refer to the Microsoft website.
Caution
The above requirements do not guarantee that this software will work on your computer.
Macintosh systems are not supported.
Operation Procedure for the Calibration Adjustment
1
Install the software on your PC (P. 3)
2
Connect the main unit and your PC via LAN cable
3
Projector and PC Setup (P. 4)
4
Start up the software (P. 7)
5
Connect the optical sensor
6
Calibration (P. 8)
Windows 7 (32-bit, 64-bit)
Windows 8 (32-bit, 64-bit)
Windows 10 (32-bit, 64-bit)
1 GB or more
256 MB or more
.NET Framework 3.0 / 3.5
USB port
LAN port
*1
2