Changing The Color System (Video Menu Mode Only) - JVC DLA-G150CLU Operating Instructions Manual

Menu Operations
Basic Menu Operation (Cont.)
Basic Button Functions in the Menu Mode
Button Function
MENU Enters the main menu or exits the menu mode.
Cursor button 5/∞ Selects an item in the menu. Pressing ∞ or 5 will scroll the item in the menu.
Cursor button 2/3
Sets or adjusts the value.
PRESET If pressed while the keystone setting submenu is displayed, the value is set to "0".
EXIT Returns to the previous menu.
ENTER Used to enter the submenu from the main menu.
Used to enter the next submenu if "ENTER" is displayed in the selected item.
Remote control unit
QUICK
ALIGN. OPERATE
HIDE
W W
SCREEN SCREEN FREEZE COMP VIDEO
S S
PC1 PC2 DVI Y/C
T T
DIGITAL ZOOM FOCUS
KEYSTONE ZOOM
W W
PRESET MENU
PRESET button MENU button
ENTER button
EXIT button
EXIT ENTER
Cursor buttons
5/∞ / 2/3
RM-M160 REMOTE CONTROL UNIT
Video menu mode
Video main menu
Menu
3 or
Image adj.
Contrast
ENTER
Set up
Brightness
Color
Color temp.
Tint
Options
Sharpness
Language EXIT
All reset
Information
Press 5/∞ to select an item.
PC menu mode
PC main menu
Menu
3 or
Image adj.
Contrast
ENTER
Set up
Brightness
Sharpness
Color temp.
All reset
Options
Language
EXIT
Information
Press 5/∞ to select an item.
44
All manuals and user guides at all-guides.com
Projector
STAND BY
LAMP TEMP
OPERATE
HIDE
PC
KEYSTONE
VIDEO
PRESET MENU
PRESET MENU
button button
EXIT ENTER
button button
EXIT ENTER
Cursor buttons
5/∞ / 2/3
Video submenu
Image adj.
Contrast 12
Brightness 12
Color 12
Tint 12
Sharpness 1
All reset ENTER
Press 5/∞ to select an item.
Press 2/3 to set or adjust the value.
PC submenu
Image adj.
Contrast 12
Brightness 12
Sharpness
1 2 3 4 5
All reset ENTER
Press 5/∞ to select an item.
Press 2/3 to set or adjust the value.

Changing the Color System (Video Menu Mode Only)

This function is available only in Video menu mode.
The menu is only displayed when there is a signal for the AV IN (Y/C, VIDEO and COMP) terminal.
Normally, use the color system in AUTO. If operation in AUTO is unstable, such as color not being shown, set to a dedicated
color system in accordance with the color system of the video signal being input.
1
Press the MENU button.
The main menu appears on the screen.
2 Select "Set up" with the cursor button 5 or ∞ ∞ ∞ ∞ , and press 3 3 3 3 or the ENTER button.
The "Set up 1" submenu appears on the screen.
3 Select "Decoder" with the cursor button 5 or ∞ ∞ ∞ ∞ , and press the ENTER button.
The "Decoder" submenu appears on the screen.
Video submenus
Set up 1
Position ENTER
Gamma Down Cinema Up
4:3 16:9
Aspect ratio
Decoder ENTER
Page 2 ENTER
4 Set the color system with the cursor button 5 or ∞ ∞ ∞ ∞ .
AUTO: Normally, set to "AUTO". (Factory set value)
The color system of a video signal being input is automatically identified and displayed in [ ].
In [ ], B/W (Black & White), NTSC, NTSC4.43, PAL or SECAM will be displayed. (It is not always displayed.)
For example, AUTO [ NTSC ] shows that the NTSC signal is being received.
NTSC: Dedicated to NTSC.
NTSC4.43:Dedicated to NTSC4.43.
PAL: Dedicated to PAL.
SECAM: Dedicated to SECAM.
5
Press the EXIT button to return to the previous menu or press the MENU button to
exit the menu mode.
Menu Operations
Decoder
AUTO [ NTSC ]
NTSC
NTSC4.43
ENTER
PAL
SECAM
EXIT
45