Gage
Low
700 P 06
PRESSURE MODULE
RANGE
100 PSIG
700 kPa
7 bar
BURST PRESSURE 300 PSIG
Figure 13. Gage and Differential Pressure Modules
Shop for Fluke products online at:
To prevent possible damage to the Product or
Differential
to equipment under test:
High
•
Never apply more than 10 ft.-lb. of torque
700 P 04
between the pressure module fittings, or
PRESSURE MODULE
RANGE
15 PSID/G
100 kPa
1 bar
between the fittings and the body of the
BURST PRESSURE 45 PSIG
module.
•
Always apply correct torque between the
pressure module fitting and connecting
fittings or adapters.
•
Never apply pressure above the rated
maximum printed on the pressure module.
•
Use the pressure module only with
gks11f.eps
specified materials. See the printing on the
pressure module or the pressure module
instruction sheet for the acceptable
material compatibility.
MyFlukeStore
www.
Documenting Process Calibrator
Measure Mode
Caution
1.888.610.7664
.com
33