Cabinet Disassembly Instructions; Disassembly Method - Sylvania DVL1000G Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
[1] Top Cover
[2] Front Unit
[3] Tray Panel
[6] Reinforce Plate
[8] DVD Main CBA Unit
[9] DVD Mechanism
[10] AV CBA
[12] Main PCB Holder

2. Disassembly Method

ID/
Loc. Part
Fig.
No.
No.
[1] Top Cover D1 5(S-1)
*4(L-1), *2(L-2),
[2] Front Unit D2
*3(L-3), *CN2001
[3] Tray Panel D2 *2(L-4)
Function
[4] D3 *3(L-5)
CBA
Front
[5] D3 ----------
Assembly
Reinforce
[6] D4 2(S-2)
Plate
[7] Rear Panel D4 4(S-3), (S-4), (S-5)
(S-6), *CN201,
DVD Main
[8] D5 *CN301, *CN401,
CBA Unit
*CN601
DVD D5
[9] 4(S-7)
Mechanism D6
[10] AV CBA D7 (S-8), (S-9)
Plate
[11] D8 (S-10)
Holder
[4] Function CBA
[5] Front Assembly
[7] Rear Panel
[11] Plate Holder
Removal
Remove/*Unhook/
Unlock/Release/ Note
Unplug/Desolder
---
1
1
---
---
---
---
2
2
3
---
---
ID/
Loc. Part
No.
Main PCB
[12]
Holder
↓ ↓
(1) (2)
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to "Reference Notes."
About tightening screws
When tightening screws, tighten them with the
following torque.
Screws
(S-1), (S-2), (S-3), (S-4),
(S-5), (S-6), (S-7), (S-8),
(S-9), (S-10)
1-5-1
Removal
Remove/*Unhook/
Fig.
Unlock/Release/
No.
Unplug/Desolder
D8 2(S-11)
↓ ↓
(3) (4)
Torque
0.45 ± 0.05 N·m
E6A22DC
Note
---
↓
(5)