Installing The Sensors On Your Bike (Cyclo 405 Hc); Installing The Sensors On Your Bike (Cyclo 605 Hc) - Mio Cyclo 400 series User Manual

3. To remove the device from the bike mount, rotate it counter-
clockwise.

Installing the sensors on your bike (Cyclo 405 HC)

1. Follow the instruction below to install the cadence/speed sensor kit
on your bike.
2. Ensure that the magnets are aligned with the sensing area on the
sensors.
3. When done, you can manually pair the sensor with your device by
tapping Main menu > Settings > Sensors > Cadence/Speed.
The cadence sensor contains a replaceable CR2032 battery. Follow the
instructions below to replace the battery:
1. Locate the battery cover on the back of the sensor, and then twist the
cover anticlockwise (e.g. by using a coin) to remove the cover and
battery.
2. Insert the new battery into the battery chamber and replace the cover.
3. Twist the cover clockwise (e.g. by using a coin) to close the cover.

Installing the sensors on your bike (Cyclo 605 HC)

1. Follow the instruction below to install the cadence/speed sensor kit
on your bike.
• Speed sensor
1 2
7
3 4