Using Wifi - Mio Cyclo 400 series User Manual

Using WIFI

Note: This feature is not available on all models.
You can synchronise data (e.g. upload recordings and download saved
tracks) with MioShare by accessing the Internet through WIFI (wireless
local area network). WIFI allows your device to connect to the Internet
through a wireless connection. To use WIFI on your device, you need
access to a wireless access point.
1. Enable the WIFI function from Main menu > Settings > WIFI Sync.
Note: The WIFI function of the device is disabled by default.
2. The device will automatically scan for available wireless networks.
The network names and security settings (public network or secured
with WEP/WPA-PSK/WPA2-PSK) of the detected wireless networks
will be displayed on the WIFI settings screen.
3. From the available networks list, tap a wireless network to connect.
• If you select a public network, tap
• If you select a network that is secured with WEP/WPA-PSK/
WPA2-PSK, enter the password and then tap
directly to start connecting.
.
24
Note: On the WIFI settings screen, tap Refresh to search the networks again.
Note: You can add a network manually by tapping Add Network on the WIFI
settings screen. Enter the network name and complete the security setting, and then
tap to connect to the network.
4. When your device is connected to a wireless network, it starts to
synchronise data with MioShare automatically.
Please note that you need to register your device on MioShare before
using WIFI to synchronise data.
Note: You may see the landing page shown on the browser during connecting.
Follow the on-screen instruction to login and synchronise data.
5. When done, the sync result will be displayed on the message
window.
Tap OK to return to the WIFI settings screen. The WIFI connection
will be disconnected automatically.
