Sp.admin.mode - Canon LBP351 Series Service Manual

Item
IKEINTVL To set the IKE retry interval (seconds).
SPDALDEL To set whether to initialize the device at next startup. Be sure to return this value to "0" after initialization is
completed.
IPSDEBLY Since IPsec operates by a different process from the main program, log information is not kept in the Sublog
Board.
Therefore, change the value when obtaining the IPsec log.
The setting is enabled after restart, and this value becomes "0" internally after restart.
When this log is enabled, a file named "/APL_LOG/ipsec/ipseclog.txt" is generated, in which the log infor-
mation is stored. However, this file is cleared when turning ON and then OFF the power.
PFW SETTING
ILOGKEEP The time is saved when an address is blocked by packet filtering. The log is not notified to UI when an access
is made from the same address within the specified period of time.
The specified period of time mentioned above can be set.
Restart is necessary to reflect the setting.
ILOGMODE Since packet filtering becomes enabled for all protocols, it blocks packets not related to this machine, for
which logs can be kept.
Therefore, logs of devices which are not malicious are kept as well, causing the log volume to become large.
Use this item for users who want to keep logs precisely.
IPTBROAD Transmission to IPv4 multicast address, broadcast address and subnet broadcast address is allowed even
if the default policy is set to "Reject" in the IPv4 transmission setting.
In addition, IPv6 multicast address transmission is allowed even if the default policy is set to "Reject" in the
IPv6 transmission setting. When setting to reject multicast transmission also, the setting can be changed by
switching the service mode value.
EAPOL_WT Time to wait for a response (or the next request) to EAPOL packet sent by the device.
GCP-URLC To enable changing of the connection destination URL for cloud print from remote UI.
Remote UI> Settings/Registration: Preferences: Network > Google Cloud Print Settings > Edit Basic Settings
> Connection Destination

SP.ADMIN.MODE

Item
MAINTENANCE C.
• 1 to 30 (* Default value: 5)
• 0: Initialize the device. (*default)
• 1: Do not initialize the device.
• 0: Do not keep logs. (*default)
• 1 to 3: Log level 1 to 3, fatal error information
• 4 to 6: Log level 4 to 6, warning information
• 7: Log level 7, important log information
• 8 to 10: Log level 8, all logs
• 0: 1 minute
• 1: 1 hour
• 2: 2 hours
• 3: 3 hours
• ...
• 47: 47 hours
• 48: 48 hours
• 0: Keep unicast to the own machine only. (*default)
• 1: Keep all filter logs.
• 0: Allow multicast transmission. (*default)
• 1: Reject multicast address transmission when the transmission default policy is set to "Reject".
• 2 to 10: Not used
• 10 to 120 (* Default value: 30)
• ON: Can be changed (display) * default
• OFF: Cannot be changed (hide)
Not used
Description
Description
175
9. Service Mode