Using The Sr+ Mode With A Pioneer Plasma Display - Pioneer VSX-LX70 Operating Instructions Manual

Other connections
08
Important
• You can't use the SR+ features when HDMI Control
is set to ON. Make sure to set HDMI Control to OFF
when you use the SR+ features (page 63).
• If you connect to a Pioneer plasma display using an
SR+ cable, you will need to point the remote control
at the plasma display remote sensor to control the
receiver. In this case, you won't be able to control the
receiver using the remote control if you switch the
plasma display off.
• Before you can use the extra SR+ features, you need
to make a few settings in the receiver. See The Input
Setup menu on page 64 and SR+ Setup for Pioneer
plasma displays on page 66 for detailed instructions.
• Use a 3-ringed miniplug SR+ cable to connect the
CONTROL IN jack of this receiver with the CONTROL
OUT jack of your plasma display.
VIDEO
INPUT 1
DVD player
DVD/LD
AUDIO IN
STANDBY/ON
INPUT
SELECTOR
To make the most of the SR+ features, you should
connect your source components (DVD player, etc.) in a
slightly different way to that described in this chapter. For
each component, connect the video output directly to the
plasma display, and just connect the audio (analog and/
or digital) to this receiver.
60
En
VIDEO
Pioneer plasma
INPUT 2
display
Satellite receiver, etc
SAT
AUDIO IN
VSX-LX70
PHASE ADVANCED DIGITAL PRECISION DIGITAL VIDEO
CONTROL MCACC PROCESSING SCALER HDMI
PHASE MCACC AUTO SURR/ HOME STANDARD ADVANCED
CONTROL POSITION STREAM DIRECT THX SURROUND SURROUND
MASTER
VOLUME
This receiver
Using the SR+ mode with a Pioneer
plasma display
When connected using an SR+ cable, a number of
features become available to make using this receiver
with your Pioneer plasma display even easier. These
features include:
• On-screen displays when making receiver settings,
such as speaker setup, MCACC setup, and so on.
• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the plasma
display.
• Automatic volume muting on the plasma display.
See also SR+ Setup for Pioneer plasma displays on
page 66 for more on setting up the receiver.
Important
• The SR+ features do not work when any of the iPod
or HOME MEDIA GALLERY (VSX-LX70 only) function is
selected.
SYSTEM OFF
RECEIVER INPUT SOURCE
SELECT
CD CD-R HDMI
DVD TV BD TV CTRL
HOME MEDIA
ZONE2/3
DVR2 GALLERY
DVR1 i Pod TUNER RECEIVER
1 Make sure that the plasma display and this receiver
are switched on and that they are connected with the
SR+ cable.
See Using this receiver with a Pioneer plasma display
above for more on connecting these components.
• Make sure you have also selected the display input to
which you've connected the receiver in The Input
Setup menu on page 64.
2 To switch SR+ mode on/off, press RECEIVER , then
the SR+ button.
The front panel display shows SR+ ON or SR+ OFF.
• The automatic video input switching and the
automatic volume muting features are enabled
separately; see SR+ Setup for Pioneer plasma displays
on page 66.
SLEEP DIMMER ANALOG
ATT
GENRE
SR+
D.ACCESS CLASS
DISC
CLEAR
+10
CH ENTER
LEVEL
A PARAMETER V PARAMETER
TOP MENU ì
MENU T.EDIT
TUNE
BAND ST ST
ì ì
ENTER
SETUP SETUP RETURN RETURN
TUNE
PROGRAM