Display - Pioneer VSX-LX70 Operating Instructions Manual

Controls and displays
04

Display

Illustration shows the VSX-LX70 display
AUTO
DIGITAL
ANALOG
STREAM DIRECT
2 PRO LOGIC
THX
STEREO
SP
14 15
1 SIGNAL indicators
Light to indicate the currently selected input signal.
AUTO lights when the receiver is set to select the input
signal automatically (page 32).
2 Program format indicators
These change according to which channels are active in
digital sources.
L – Left front channel
C – Center channel
R – Right front channel
SL – Left surround channel
S – Surround channel (mono)
SR – Right surround channel
SBL – Left surround back channel
SB – Surround back channel (mono)
SBR – Right surround back channel
LFE – Low frequency effects channel (the ((( ))) indicators light when
an LFE signal is being input)
3 Digital format indicators
Light when a signal encoded in the corresponding format
is detected ( DSD PCM lights during DSD (Digital Stream
Direct) to PCM conversion with SACDs).
4 S.RTRV
Lights when the Sound Retriever is switched on (page 68) .
5 MULTI-ZONE
Lights when the MULTI-ZONE feature is active (page 56).
6 FULL BAND
Lights when the Full Band Phase Control is switched on
(page 10).
7 PHASE CONTROL
Lights when the Phase Control or Full Band Phase
Control is switched on (page 10).
8 Sound processing indicators
Light according to the active Audio parameter(s) (page 68)
and/or ANALOG ATT (page 71) .
9 V.SB
Lights during Virtual surround back processing (page 33) .
10 TUNER indicators
TUNED – Lights when a broadcast is being received.
26
En
1 2 3
2
DIGITAL
L C R
WMA9 Pro
DTS
PCM
SL S SR
DSD PCM
AAC
HDMI
SBL SB SBR
CD
LFE
CD-R
eo
N : 6
ADV.SURROUND
STANDARD
AB SLEEP
16 17 18
4 5 6 7
2HD
FULL BAND
MULTI-ZONE DIALOG E ATT
S.RTRV SOUND Hi-Bit/Sampling
TUNER DVD TV
PHONO iPod BDP DVR
19
STEREO – Lights when a stereo FM broadcast is
being received in auto stereo mode.
MONO – Lights when the mono mode is set using
the MPX button.
11 SOUND
Lights when any of the Midnight, Loudness or tone
controls feature is selected (page 68).
12 Master volume level
Shows the overall volume level. –80dB indicates the
minimum level, and +12dB indicates the maximum level.
13 SR+
Lights when the SR+ mode is switched on (page 60).
14 STREAM DIRECT
Lights when Direct/Pure Direct is selected (page 31).
15 Speaker indicators
Lights to indicate the current speaker system, A and/or B (page 54).
16 Listening mode indicators
THX – Lights when one of the Home THX modes is
selected.
ADV.SURROUND – Lights when one of the
Advanced Surround modes has been selected.
STEREO – Lights when stereo listening is switched
on (see Listening in stereo on page 31).
STANDARD – Lights when one of the Standard
Surround modes is switched on (see Listening in
surround sound on page 29).
17 SLEEP
Lights when the receiver is in sleep mode (page 71).
18 Matrix decoding format indicators
2 PRO LOGIC IIx – This lights to indicate
2 Pro Logic II / 2 Pro Logic IIx decoding (page 29).
Neo:6 – When one of the Neo:6 modes of the receiver
is on, this lights to indicate Neo:6 processing (page 29) .
19 Character display
Displays various system information.
20 Input source indicators
Light to indicate the input source you have selected.
8 9 10 11 12
DNR TUNED
OVER STEREO
MONO
V.SB
VIDEO HMG SR+
[ 2 ]
HDMI [ 1 ] [ 3 ] [ 4 ]
13
dB
20