Controls And Displays; Front Panel - Pioneer VSX-LX70 Operating Instructions Manual

Controls and displays

04
Chapter 4:
Controls and displays

Front panel

Illustration shows the VSX-LX70 front panel
1 2
INPUT
SELECTOR
9
1 INPUT SELECTOR dial
Use to select an input source.
2 STANDBY/ON
Switches the receiver between on and standby. Power
indicator lights when the receiver is on.
3 PHASE CONTROL – Press to switch on/off Phase
Control or Full Band Phase Control (page 10).
MCACC POSITION – Press to switch between
MCACC presets (page 32).
AUTO SURR/STREAM DIRECT – Press to select Auto
Surround ( page 29 ) or Stream Direct (page 31)
listening.
Note
1 The MCACC indicator does not light when the MCACC preset memory currently being selected has not been corrected with Acoustic Calibration EQ
Professional or when EQ is set to OFF in the Audio parameter menu (see Setting the Audio options on page 68).
24
En
3 4
STANDBY/ON
PHASE ADVANCED
CONTROL MCACC
PHASE MCACC AUTO SURR/
CONTROL POSITION STREAM DIRECT
10 11 12 13
AUDIO PARAMETER VIDEO
(TUNE)
SPEAKERS
PHONES
(ST) ENTER (ST)
(TUNE)
SETUP RETURN
19 20 21 22
5 6
DIGITAL PRECISION DIGITAL VIDEO
PROCESSING SCALER
HOME STANDARD
THX SURROUND
14 15
MULTI – ZONE &
SIGNAL
SOURCE/REC SEL
TUNER EDIT BAND SELECT
CONTROL ON/OFF
VIDEO/GAME 2 INPUT
MCACC
USB
SETUP MIC
DIGITAL IN S-VIDEO
23 24
4 Remote sensor
Receives the signals from the remote control (see
Operating range of remote control unit on page 25).
5 Character display
See Display on page 26.
6 PHASE CONTROL indicator – Lights to indicate
Phase Control or Full Band Phase Control is selected
(page 10).
ADVANCED MCACC indicator – Lights when one of
the MCACC presets (page 32) is selected.
Digital Precision Processing indicator – Lights to
indicate digital processing (for example, it
disappears when Pure Direct (page 31) is on, or when
listening through the multichannel analog inputs).
7
VSX-LX70
HDMI
ADVANCED
SURROUND
MASTER
VOLUME
16 17 18
SB ch STEREO/
PROCESSING F.S.SURR
VIDEO L AUDIO R
25
8
1