05
Listening to your system
Chapter 5:
Listening to your system
Listening in surround sound
Using this receiver, you can listen to any
source in surround sound. However, the
options available will depend on your speaker
setup and the type of source you're listening
to.
If you connected surround back speakers, see
also Using the Surround Back Channel (SB
CH) on page 39.
•
While listening to a source, press
STANDARD.
If the source is Dolby Digital, DTS, or Dolby
Surround encoded, the proper decoding
format will automatically be selected and
shows in the display.
With two channel sources, press STANDARD
repeatedly to select from:
VSX-D514 only:
• 2 Pro Logic II MOVIE – Up to 5.1 channel
sound, especially suited to movie sources
• 2 Pro Logic II MUSIC – Up to 5.1 channel
sound, especially suited to music sources
• 2 PRO LOGIC – 5.1 channel surround
sound
36
En
STANDARD
VSX-D714/D814 only:
• 2 Pro Logic IIx MOVIE – Up to 6.1
channel sound, especially suited to movie
sources
• 2 Pro Logic IIx MUSIC – Up to 6.1
channel sound, especially suited to music
sources
• 2 PRO LOGIC – 5.1 channel surround
sound
• NEO:6 CINEMA – 6.1 channel sound,
especially suited to movie sources
• NEO:6 MUSIC – 6.1 channel sound, espe-
cially suited to music sources
• You can't use the STANDARD mode with
96kHz PCM or (VSX-D714/D814 only) DTS
96kHz/24-bit stereo sources.
• VSX-D714/D814 only – During playback of
a Dolby Digital multichannel source with
the SB CH MODE switched ON, you will
only be able to select DOLBY EX or 2
Pro Logic IIx MUSIC. See Using the
Surround Back Channel (SB CH) on
page 39 for more on this.