Pioneer VSX-D514 Operating Instructions Manual page 28

04 Controls and displays
8 STATION +/– buttons
Selects station presets when using the tuner
(page 58).
9 TUNING +/– buttons
Selects the frequency when using the tuner
(page 56).
10 LISTENING MODE buttons
STANDARD
Press for Standard decoding and to
switch between the various Pro Logic II
and (VSX-D714/D814 only) Neo:6 options
(page 36).
ADVANCED SURROUND
Use to switch between the various
surround modes (page 37).
STEREO/DIRECT
Switches between direct and stereo
playback. Direct playback bypasses the
tone controls and channel levels for the
most accurate reproduction of a source
(page 38).
11 SIGNAL SELECT
Use to select an input signal (page 38).
12 MIDNIGHT/LOUDNESS
Use Midnight when listening to movie
soundtracks at low volume. Use Loudness to
boost the bass and treble at low volume
(page 41).
13 SPEAKER IMPEDANCE
Use to change the impedance setting
(page 72)
14 VSB MODE
Selects the Virtual Surround Back (VSB)
mode (page 40).
15 TONE
Press this button to access the bass and
treble controls, which you can then adjust
with the MULTI JOG dial (page 41).
28
En
16 QUICK SETUP
See Using the Quick Setup on page 12.
17 MUTE
Mutes the sound (or restores the sound if it
has been muted).
18 FL DIMMER
Dims or brightens the display.
19 INPUT ATT
Attenuates (lowers) the level of an analog
input signal to prevent distortion.
20 MPX
Press to receive a radio broadcast in mono
(page 56).
21 CLASS
Switches between the three banks (classes)
of station presets (page 57).
22 TUNER EDIT
Press to memorize and name a station for
recall (page 57).