Power Door Locks; Keyless Enter-N-Go - Passive Entry - Dodge charger 2018 Owner's Manual

Power Door Locks

A power door lock switch is on each front door trim panel.
Use this switch to lock or unlock the doors.
Power Door Lock Switch
The doors can also be locked and unlocked with the
Keyless Enter-N-Go — Passive Entry system. Refer to
"Keyless Enter-N-Go — Passive Entry" in this section for
further information.
If you push the power door lock switch while the ignition
is in the ACC or ON/RUN position, and any front door is
open, the power locks will not operate. This prevents you
from accidentally locking the key fob in the vehicle.
GETTING TO KNOW YOUR VEHICLE 37
Placing the ignition in the OFF position or closing the door
will allow the locks to operate. If the driver door is open,
and the ignition is in the ACC or ON/RUN position, a
chime will sound as a reminder to remove the key fob.
Keyless Enter-N-Go — Passive Entry
The Passive Entry system is an enhancement to the vehi-
cle's Remote Keyless Entry system and a feature of Keyless
Enter-N-Go. This feature allows you to lock and unlock the
vehicle's door(s) without having to push the key fob lock
or unlock buttons.
NOTE:
• Passive Entry may be programmed on or off. Refer to
"Uconnect Settings" in "Multimedia" for further infor-
mation.
• If wearing gloves on your hands, or if it has been
raining/snowing on the Passive Entry door handle, the
unlock sensitivity can be affected, resulting in a slower
response time.
• If the vehicle is unlocked by Passive Entry and no door
is opened within 60 seconds, the vehicle will re-lock and
arm the security alarm (if equipped).
3