Dodge charger 2018 Owner's Manual page 445

Setting Name
ParkView Backup
Camera Delay
NOTE:
When the vehicle is shifted out of REVERSE (with camera delay turned off), the rear camera mode is exited and the
navigation or audio screen appears again. When the vehicle is shifted out of REVERSE (with camera delay turned
on), the rear view image with dynamic grid lines will be displayed for up to ten seconds after shifting out of
"REVERSE" unless the forward vehicle speed exceeds 8 mph (12 km/h), the transmission is shifted into PARK or the
ignition is switched to the off position. To set the ParkView Backup Camera Delay press the "Controls" button on the
touchscreen, the "settings" button on the touchscreen, then the "Safety & Assistance" button on the touchscreen.
Blind Spot Alert —
If Equipped
NOTE:
• When the feature "Blind Spot Alert" is selected, the Blind Spot Alert feature Provides alerts, visual and/or audible,
to indicate objects in your blind spot. The Blind Spot Alert feature can be activated in "Lights" mode. When this
mode is selected, the Blind Spot Monitor (BSM) system is activated and will only show a visual alert in the exterior
mirrors. When "Lights & Chime" mode is activated, the Blind Spot Monitor (BSM) will show a visual alert in the
exterior mirrors as well as an audible alert when the turn signal is on. When "Off" is selected, the Blind Spot
Monitor (BSM) system is deactivated.
• If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is not
damaged, the sensor may have become misaligned. Take your vehicle to an authorized dealer to verify sensor
alignment. Having a sensor that is misaligned will result in the BSM not operating to specification.
On
Off Lights
Selectable Options
Lights & Chime
MULTIMEDIA 443
Off
10