Setting The Button Alert Volume; Setting The Time-Out Setting; Resetting The Remote Control - Pioneer VSX-59TXi Elite Operating Instructions Manual

Before you start

Setting the button alert volume

You can set the volume of the 'beep' you hear when you
press a button on the remote.
• Press BEEP to select a setting.
Each press selects between quiet, loud or off. The current
setting is shown on the touch screen.
SETUP
CLOCK DISPLAY : AM/PM
CLOCK SETTING
BEEP :
TIMEOUT
KEY LABEL

Setting the time-out setting

• Default setting: 60sec
To save battery life, a timer automatically switches off the
remote control off after a set amount of time if no
commands are entered. You can adjust separate time-
out settings for the LCD, and the remote backlight.
1 Press TIMEOUT.
SETUP
CLOCK DISPLAY : AM/PM
CLOCK SETTING
BEEP :
TIMEOUT
KEY LABEL
2 Use the + and – buttons to set the LCD TIMEOUT
and BACKLIGHT TIMEOUT settings.
You can adjust these from 20–120 seconds.
• The backlight timeout can't be longer than the LCD
timeout setting.
TIMEOUT
LCD TIME OUT
-
60 sec
BACKLIGHT TIME OUT
- 60 sec
ENTER
2/3
2/3
+
+
CANCEL
3 Press ENTER when you're finished.
You'll return to the remote setup menu.

Resetting the remote control

Use this feature to reset the remote control settings to
the factory defaults.
Important
• Doing this will erase any of your personalized
settings.
1 Press RESET TO DEFAULT.
SETUP
RESET TO DEFAULT
2 Confirm by pressing YES after reading each
screen.
RESET
Do you want to reset
the REMOTE to the
DEFAULT settings ?
YES
NO
After the screen goes blank, the Home menu appears
within a minute or so, and the remote control will be reset
to the default settings.
3/3
RESET
ALL settings you made
will be ERASED.
Is it all right?
YES
NO
01
11
En