Alcatel-Lucent MDR-8000 User Manual page 84

Audio 1
3.17.3.1
Audio 1 (J316) is a 4-wire function port on the backplane that provides off-hook detection,
level control, E and M-lead signaling, and DTMF and 2-wire handset capabilities.
3.17.3.2 Audio 2
Audio 2 (J317) is a 4-wire function port on the backplane that provides off-hook detection,
level control, and E and M-lead signaling. Audio 2 has no DTMF decoding capabilities.
Recommended connectorized cable assembly – PN 695-4125-026 through
pair shielded, jacketed cable with 9-pin D-type connector on each end). See Figure 3 - 24 for
shelf connector locations and pinout. Refer to Table 3 - 16 for mating cable wiring and color
code.
or
Recommended cable – PN 424-0305-030 (26 AWG 5 pair shielded, jacketed cable) for wire-
wrapping to wirewrap adapter PN 3DH04178AB. See Figure 3 - 25 for pinout.
Table 3 - 16 Audio Mating Cable Wiring and Color Codes
FUNCTION END 1
AUDIO TIP IN 01
AUDIO RING IN 06
AUDIO M LEAD 02
AUDIO E LEAD 07
AUDIO TIP OUT 03
AUDIO RING OUT 08
CALL DETECT 04
CALL COMMON 09
GND 05
NOT USED 10
3-40
WIRE COLOR PAIR WIRE COLOR
BLACK 1 BLACK
RED 1 RED
BLACK 2 BLACK
WHITE 2 WHITE
BLACK 3 BLACK
GREEN 3 GREEN
BLACK 4 BLACK
BLUE 4 BLUE
BLACK 5 BLACK
YELLOW 5 YELLOW
030 (26 AWG 5
END 2 FUNCTION
03 AUDIO TIP OUT
08 AUDIO RING OUT
07 AUDIO E LEAD
02 AUDIO M LEAD
01 AUDIO TIP IN
06 AUDIO RING IN
04 NOT USED
09 NOT USED
05 GND
10 NOT USED