Alcatel-Lucent MDR-8000 User Manual page 22

1. OPEN USI CONTROLS SCREEN.
Controls -- MDR-8000 DS3
File View Setup Options
F4 F5
Alarm Status Analog Monitor
ELMC Address:
Description:
IN-SERVICE
A Transmitter On Line
B Transmitter On Line
A Receiver On Line
B Receiver On Line
A I/O On Line
B I/O On Line
A ATPC HIGH Power Lock
B ATPC HIGH Power Lock
A ATPC LOW Power Lock
B ATPC LOW Power Lock
Thursday, November 30, 2000
Figure 2-2 RCVR Manual Switch Using USI Control Screen
2-4
F6 F7
Performance Station Alarm
LOCAL CONTROLS
J7915
SILVERTON
2. SELECT RCVR TO PUT IN-SERVICE.
SYSTEM LOOP-BACK
3. SELECT YES ON CONFIRMATION MESSAGE
USER CONTROLS
A I/O LOOPBACK
TO ENABLE FUNCTION.
Control #1
B I/O LOOPBACK
4. VERIFY GREEN IN-SERVICE STATUS CIRCLE DISPLAYS.
Control #2
Control #3
Control #4
Control #5
Control #6
1:44:19 PM USI Version R1.02
F8
User Control
Communicating*
DS1 LINE LOOP-BACK RCV to XMT
Line 1 loopback
Line 2 loopback
Line 3 loopback
Controller Version R1.02
F9
Provisioning
LMW-5081
08/15/02