Alcatel-Lucent MDR-8000 User Manual page 24

Controls -- MDR-8000 DS3
File View Setup Options
F4 F5
Alarm Status Analog Monitor
ELMC Address:
Description:
IN-SERVICE
A Transmitter On Line
B Transmitter On Line
A Receiver On Line
B Receiver On Line
A I/O On Line
B I/O On Line
A ATPC HIGH Power Lock
B ATPC HIGH Power Lock
Figure 2-3 XMTR Manual Switch Using USI Control Screen
Controller Switch
Perform I/O manual switch (Figure 2-1) using controls on front panel of controller
module.
USI Switch
Perform I/O manual switch (Figure 2-4) using the USI control screen.
2-6
F6 F7
Performance Station Alarm
LOCAL CONTROLS
J7915
SILVERTON
1. SELECT XMTR TO PUT IN-SERVICE.
SYSTEM LOOP-BACK
2. SELECT YES ON CONFIRMATION MESSAGE
A I/O LOOPBACK
TO ENABLE FUNCTION.
B I/O LOOPBACK
3. VERIFY GREEN IN-SERVICE STATUS CIRCLE DISPLAYS.
USER CONTROLS
Control #1
Control #2
Control #3
Control #4
Control #5
Control #6
1:44:19 PM USI Version R1.02
Switching the radio transmitter may momentarily interrupt
traffic. Switching I/Os will momentarily interrupt traffic and
auxiliary channel service. Before switching, obtain permission
from the proper authority.
F8
User Control
Communicating*
DS1 LINE LOOP-BACK RCV to XMT
Line 1 loopback
Line 2 loopback
Line 3 loopback
CAUTION
Possibility of
Service
Interruption
Controller Version R1.02
F9
Provisioning
LMW-5076
06/12/04