Alcatel-Lucent MDR-8000 User Manual page 47

1. DETERMINE IF INSTALLATION
REQUIRES POS OR NEG GND.
2. INSTALL BATT, GND, AND JUMPER
WIRES ON PWR CABLE ASSEMBLY.
3. CONNECT PWR CABLE ASSEMBLY
TO J1 (AND J2 IF HOT-STBY).
4. CONNECT RACK GND AND
CHASSIS GND.
5. CONNECT BATT.
REAR VIEW OF SHELF
WARNING
Possibility of
Damage
To Equipment
To prevent connector damage and
improper wiring, ensure power cable
mating connector is properly oriented
and aligned with
before attempting to seat connectors.
CONNECT + BATT WIRE
TO + RACK GND FOR
POS GND INSTALLATIONS
PIN 1
POS
(J2 ON OPPOSITE
END OF SHELF)
shelf connector
ORN
BLK
ORN
12 AWG
12 AWG
+ BATT
Figure 3-1 Power Cable Connection
PIN 2 PIN 3
GND NEG
J1
PWR CABLE ASSEMBLY
PN 695-7845-005/009
RED
SLIDE-ON
BLK
LUG
CONNECT – BATT WIRE
TO – RACK GND FOR NEG
GND INSTALLATIONS
RED
12 AWG
– BATT
CHASSIS
GND
LMW-3103F
11/20/06
3-3