Using The Watch In A Medical Facility Or Aircraft; Unpairing; After Purchasing Another Phone - Casio QW 5513 Operation Manual

Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto signal
receive or connection with a phone may cause
problems, you can perform the procedure
below to disable it. To re-enable auto time
adjustment, perform the same operation
again.
1.
Y On the Home Screen, tap the "G-
SHOCK Connected" icon.
2.
X Hold down the (C) button for about 2
seconds.
The second hand will move to "R". Keep
●
(C) depressed until the second hand
starts moving again and then stops at
"R".
The second hand will move from "R" to
●
"C" when a connection is established
between the watch and phone.
3.
Y Perform the operation shown on the
phone screen to enable or disable auto
time adjustment.
Operation Guide 5513

Unpairing

1.
X If the watch is connected with a phone,
press any button to terminate the
connection.
Connected
2.
Y On the Home Screen, tap the "G-
SHOCK Connected" icon.
3.
Y Perform the operation shown on the
phone screen to unpair.
Note
If you are unable to re-pair the watch
●
with a phone after unpairing them,
use the procedure below to delete
pairing information from the watch
and then perform the pairing
operation again.
A X Pull out the crown to the second
click.
B X Hold down (D) for about 5
seconds.
This causes the second hand to
perform one revolution and deletes the
pairing information.
C X Push the crown back in.

After Purchasing Another Phone

You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
1.
Move the phone to be paired with close to
After disconnection
(within one meter of) the watch.
2.
Y On the Home Screen, tap the "G-
SHOCK Connected" icon.
3.
Y Perform the operation shown on the
screen of the phone to be paired with.
Note
Crown
l
If a pairing prompt message appears,
●
perform the operation shown on the
phone screen.
When pairing starts, the second hand
●
will point to "R". When pairing is
complete, the second hand will move to
"C".
C mark
If your previous phone is near the
●
watch while you are trying to pair with
a new phone, the watch will pair with
the previous phone, which makes it
impossible to pair with the new
phone. If this happens, delete the
previous pairing information from the
watch. Also, unregister the watch
from the G-SHOCK Connected app
of the phone you will no longer
connect with.
Unpairing
10