Related Manuals for Casio 5496
Summary of Contents for Casio 5496
-
Page 1: Table Of Contents
MA2110-EB © 2016 CASIO COMPUTER CO., LTD. Operation Guide 5496 Contents Basic Operations General Guide Watch Face Items Using the Crown Hands and the Day Indicator Solar Charging What is solar charging? Charging the Watch Charging Time Guidelines Low and Dead Battery... -
Page 2: Basic Operations
Operation Guide 5496 Basic Operations Fast Forward/Fast Reverse Watch Face Items ● After pulling out the crown to the first or second This section provides an overview of the watch click, rotating it quickly in succession in either ① and its operations. -
Page 3: Charging The Watch
Operation Guide 5496 Charging the Watch Charging Time Guidelines Low and Dead Battery When you are not wearing the watch, put it in The table below shows guidelines for The charge level is indicated by watch hand a location where it is exposed to bright light. -
Page 4: Checking The Current Charge Level
Operation Guide 5496 Auto Time Adjustment Checking the Current Charge Level City code Second Hand Offset City Name Position The watch’s time and day settings can be Pull out the crown to the first click. LONDON (LON) 2 seconds configured in accordance with a received time... -
Page 5: Configuring City And Summer Time
Operation Guide 5496 Configuring City and Summer Time Note To change the summer time setting, hold Settings down the (A) button for about one second. Use the procedure in this section to select a The initial factory default summer time ●... -
Page 6: Auto Time Signal Receive
Operation Guide 5496 Auto Time Signal Receive Manual Time Signal Receive Checking the Receive Operation Result Auto receive is automatically attempted up to You can use a button operation to receive the three times each night between midnight and time signal. -
Page 7: Manual Time Adjustment
Operation Guide 5496 Manual Time Adjusting the Time and Day Pull out the crown to the first click. Adjustment Setting The second hand will move to the currently selected city code. You can use the procedure below to adjust the Pull out the crown to the second click. -
Page 8: Correcting Hand And Day Indicator Alignment
Operation Guide 5496 Correcting Hand and Press (A). Press (A). Day Indicator This enables the month setting operation. Confirm that the hour hand is stopped at Alignment 12 o’clock and the date indicator is stopped in between the today’s date and Strong magnetism or impact can cause the tomorrow’s date. -
Page 9: Other Information
Operation Guide 5496 Other Information Summer Time Table Push the crown back in to its normal position. When [AT (AUTO)] is selected for a city that After finishing the above operation, observes summer time, switching between City (Time Zone) List standard time and summer time will be configure time and date settings. -
Page 10: Troubleshooting
Operation Guide 5496 Troubleshooting Signal reception should have been Hands are stopped and buttons do successful, but the watch’s time and/ not work. or day is wrong. The watch is in the charge recovery mode. Time signal reception Wait until the recovery process is complete Do the hand and/or day indicator look out (for about 15 minutes). - Page 11 Operation Guide 5496 Crown Operations Nothing happens when I rotate the crown. If you do not perform any operation for about two minutes after pulling out the crown (approximately 30 minutes in the case of hand and day indicator alignment operations), crown operations will automatically become disabled.