Using Front Surround; Using Advanced Surround; Listening In Stereo - Pioneer S-X360 Operating Instructions Manual
5.1ch surround system
Hide thumbs
Also See for S-X360:
- Operating instructions manual (68 pages) ,
- Service manual (88 pages) ,
- Service manual (6 pages)
Table of Contents
Advertisement
Listening to your system
Using Front Surround
The Front Surround modes are effective when you are
using the Front surround speaker setup as described on
page 7. The surround speakers should be placed on top
of the front speakers and oriented either towards the
walls, or straight ahead, depending on which mode you
are using (see below).
7
8
SURROUND
+
INPUT
CHANNEL
–
•
Press ADVANCED to select a Front Surround mode.
Press repeatedly to select FRTMOVIE, FRTMUSIC or
EXTPOWER.
Turn each surround speaker so that the
FRONT SURROUND arrow on
base is lined up with the
the front speaker. This is only necessary with the
FRTMOVIE or FRTMUSIC modes. With EXTPOWER
(Extra Power), line up the
POWER arrow (the surround speakers should be in the
same direction as the front speakers.).
FRTMOVIE / FRTMUSIC
9
ADVANCED
+
VOLUME
DISPLAY
–
RDS DISP
AXD7442
arrow at the
EXTRA
arrow with the
EXTPOWER
Using Advanced Surround
The Advanced Surround effects can be used with any
multichannel or stereo source for a variety of additional
surround sound effects.
If you set up the system for Front surround (page 7), the
Front Surround modes will give the best results (see
Using Front Surround above).
7
8
SURROUND
+
INPUT
CHANNEL
–
•
Press ADVANCED to select an Advanced Surround
mode.
Press repeatedly to select:
• ADVMOVIE – Suitable for movies
• ADVMUSIC – Suitable for music
• EXPANDED – Wide sound field
• TV SURR. – Surround sound for mono or stereo TV
broadcasts
• SPORTS – Suitable for sports programming
• GAME – Suitable for TV game units
• VIRTUAL – A virtual surround effect using just the
subwoofer and front speakers.
• 5 STEREO – Powerful surround sound for stereo
music sources
Listening in stereo
You can listen to any source—stereo or multichannel—in
stereo. When playing a multichannel source, all
channels are downmixed to the front left/right speakers
and the subwoofer.
MCACC
/TUNE
7
8
SURROUND
+
INPUT
CHANNEL
–
•
Press SURROUND repeatedly until STEREO shows in
the display.
• You can also use the SURROUND button on the
display unit to change the listening mode.
9
ADVANCED
+
VOLUME
DISPLAY
–
RDS DISP
AXD7442
TEST TONE VIDEO IN
9
SOUND
+
VOLUME
DISPLAY
–
RDS DISP
AXD7442
05
19
En
Hide quick links:
Advertisement
Table of Contents
