Pioneer YPM-MG2196ZF Service Manual page 47

5. Remove the belt (large).
6. De-solder at the points (B) and (C).
7. Loosen the 2 screws. Remove the Loading motor
bracket.
8. Remove the belt (small).
9. Loosen the 2 screws. Remove the Loading motor.
- How to remove the Stage Mech Assy
1. Remove the Tray holder and the Tray assy.
(See Fig. 1)
Remove the Carriage mech assy.
(See Fig. 3 and 4)
Remove the Side PCB. (See Fig. 9)
Remove the Motor PCB (A). (See Fig. 9)
Load arm
assy (left)
Loading motor bracket
Belt (large)
Remove the Gear cover. (Fig. 10)
2. Unhook the Spring (C). Remove the Door-open lever.
3. Loosen the screws (D), (E), and (F). Remove the PCB
(C) and (D), and the frame.
4. Unhook the springs (A) and (B).
5. Pull out the Load arm assy (right) upward.
6. Unhook the spring (G). Remove the belt (large).
7. Loosen the screw (H). Remove the Load arm assy
Photo(L) PCB
Frame
Load arm assy (right)
YPM-MG2196ZF
Loading motor
Belt
(small)
Door open lever
Fig. 14
Ford PCB
Fig. 13
47