Changing Surround Sound - Pioneer PDSP-1 Operating Instructions Manual

Changing
Adjusting the Tone
Surround Sound
Caution:
When adjusting the digital sound projector's sound, the menu screen is displayed on the connected television
monitor. To see the display, turn on the television's power and set the television's video input to the digital
sound projector.
Note:
When adjusting the digital sound projector's sound, use the following buttons (hard keys) of the remote
control unit:
Button

Changing Surround Sound

You can adjust each channel's volume/balance while listening to the actual sound, as well as adjusting the sub-
woofer and other options.
Test Signal
A test signal can be used to adjust the output level of each channel.
Use the touch panel to select the
1
From the HOME menu, press
Press the MENU button.
2
The following "System Setup" menu appears.
System Setup
1 Surround Setup
2 All Ch Tone Control
3 Recall Memory
4 Lipsync delay
5 Stereo Mode
"Digital sound projector menu screens don't
appear" P38
Video and Audio
Calling Up a Room
Timing
Sound Setting
Compensations
Name
MENU
ENTER
PDSP menu.
; from other menus, press
27
Adjusting
Surround Effects
Function
Open/Close the menu screen
Move cursor / select items and numbers
Finalize settings
.
"Changing Each Channel's Output Level"
Displaying the
Data Screen
P29