Pioneer PDSP-1 Operating Instructions Manual page 36

Changing
Adjusting the Tone
Surround Sound
Using the
5
Using the buttons, select "Panorama", "Center width", or "Dimension", then use the
6
buttons to set the effect as desired.
Stereo Mode Menu
1 Image width
2 Image width value 1.00
3 PLII Mode
4 Panorama
5 Center width
6 Dimension
Display Setting
Panorama On/Off
Center width 0-7
Dimension 0-6
Note:
When you're finished, you can press the MENU button repeatedly to return to previous screens.
Calling Up a Room
Sound Setting
buttons, select "Music", then press the ENTER button.
On
PLII Music
Off
0
3
36
Video and Audio
Adjusting
Timing
Surround Effects
Compensations
Effect
The front sound image expands toward the rear
as well, enveloping the listener in surround
sound.
Adjusts the audible width of the center channel
(0 means sound is produced from the center
channel; as the numerical value rises, the sound
width expands, until at 7 the sound is produced
from the front right-left channels).
Shifts the surround effect balance between front
and back (0 means sound is toward the front; as
the numerical value increases, the balance shifts
toward the back, until at 6 it is produced from the
rear channel).
Displaying the
Data Screen