Pioneer PDSP-1 Operating Instructions Manual page 29

Changing
Adjusting the Tone
Surround Sound
Changing Each Channel's Output Level
- (Same as steps
1 3
1
The following screen appears:
Surround Setup
1 Left
2 Right
3 Surround L
4 Surround R
5 Center
6 Aux Center
7 Bass Management
8 Noise Source
Using the
4
The following screen appears:
Left
to edit
Press ENTER or MENU to exit
Level
Using the
5
Adjust the output level while listening to the test signal.
Setting range: 0.0 dB – 12.0 dB
Note:
When you're finished, you can press the MENU button repeatedly to return to previous screens.
Calling Up a Room
Sound Setting
- on P27, "Test Signal")
3
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Mute
off
buttons, select the desired channel, then press the ENTER button.
0.0dB
buttons, adjust the output level as desired, then press the ENTER button.
29
Video and Audio
Adjusting
Timing
Surround Effects
Compensations
Front left channel
Front right channel
Rear left channel
Rear right channel
Center channel
Displaying the
Data Screen