Pioneer PDSP-1 Operating Instructions Manual page 30

Changing
Adjusting the Tone
Surround Sound
Sub Woofer / Bass Management
This menu allows you to set the unit for a sub-woofer, and LFE channel ON/OFF.
- (Same as steps
1 3
1
4 Using the
The following screen appears:
Bass Management
1 Sub Woofer
2 LFE Level
Notes:
LFE means "Low Frequency Effect".
If "Sub Woofer" is set to "Yes", use the
the output level.
Setting range: 0.0 dB – 12.0 dB
Using the
5
The following screen appears:
Sub Woofer Menu
1 No
2 No/LFE to panel
3 Yes
Using the
6
button.
Note:
When you're finished, you can press the MENU button repeatedly to return to previous screens.
"SUB WOOFER OUTPUT connectors"
Calling Up a Room
Sound Setting
- on P27, "Test Signal")
3
buttons, select "Bass Management", and press the ENTER button.
Yes
0.0dB
buttons to select "LFE level", then use the
buttons, select "Sub Woofer", then press the ENTER button.
buttons, select either "No," "No/LFE to panel," or "Yes," then press the ENTER
P13
30
Video and Audio
Adjusting
Timing
Surround Effects
Compensations
LFE channel output level
Sub Woofer: No
(LFE will not be output from any channel)
Sub Woofer: No/LFE to panel
(LFE is output from digital sound projector)
Sub Woofer: Yes
(LFE is output to Sub Woofer)
Displaying the
Data Screen
buttons to adjust