Usb Mode - Sagem Roxy User Manual

Table of Contents

On & visible: your phone is visible and can be detected by the other Bluetooth

IMPORTANT:

Activation of Bluetooth

Bluetooth

security is better guarded because your phone remains invisible to the other devices.

Pairing procedure

Select My devices/New device.

If the Bluetooth

function is not active, the phone prompts you to activate it using one of the 3 modes described above.

The phone searches for visible Bluetooth

choice. Your phone then prompts you to enter a code which must be the same as the code entered on the remote device.

Enter and validate this code: Your phone is now paired with the remote device.

A connected device is shown in blue in the list.

[Options] on the name of a device lets you access the following options:

Activate which is used to activate the connection with the device (this step is necessary after the pairing operation) and

Deactivate which is used to deactivate the connection with the device (if the device is activated).

Rename: this is used to modify the name of the device.

Always allow: this is used to allow always the connection with the device selected.

Delete: this is used to delete the device. WARNING: using this function needs starting the pairing over again.

Delete all: this is used to delete all your devices. WARNING: using this function needs starting the pairing over again.

Notes:

Refer to the user manual of the device with which you are pairing to find out how to set this device to the mode allowing

this operation.

The code of the remote device may be predefined by the device manufacturer. In this case, refer to the user manual of this

device to find out this code.

USB mode

This mode lets you access, from a computer, the files you have saved in the phone memory or on the memory card.

You must first install a USB driver on your computer. Surf to www.planetsagem.com to download the latest installation

drivers.

After connecting the USB cable to your phone and your computer, select Enable in the Mass storage option.

You can then use the Windows file explorer to consult your multimedia files on your phone and swap data between the phone

and computer, etc.

function reduces the phone battery life. We advise you to deactivate it when not in use.

devices and displays the list. Select the device concerned and validate your

devices as long as this mode is selected.

Connection functions

Table of Contents