Car kit/Headset
This menu allows you to activate or deactivate the Automatic response option when the phone is connected to a pedestrian
kit or a car kit.
SyncML
Two selections:
-
Network (OTA): you can synchronize your phonebook, your organizer or your ToDos with your archives stored in your
operator's network depending on the options offered by your operator.
-
Local: you can synchronize your phonebook, your organizer or your ToDos with your archives stored in your computer.
Use the Wellphone software and configure your USB connection in your phone or activate Bluetooth (model my401C).
USB mode
This menu allows you to select a mode to connect the phone to a peripheral with the USB cable available as an accessory.
-
At plugging-in: if you select this option, when connecting a USB cable, the phone asks you to select the mode you want.
-
Modem: to exchange data between the phone memory and a PC.
-
Pictbridge: to connect the phone to a printer (printing photos) without using a PC.
-
USB key: to exchange data between the memory card inserted in the phone and a PC (my401C model).
Notes when the phone is connected to a personal computer in USB key mode:
-
The memory card is not detected by the phone. Consequently, if you have configured your phone with a wallpaper or a
ring tone stored in the memory card, those ones will not be used during the connections.
-
Camera is not available, neither in photo mode, nor in video mode.
30
Connectivity