Usb Mode - Sagem MY411V User Manual

- Deactivate: this is used to deactivate the connection with the device.
- Properties: this is used to display the list of the device's Bluetooth
Notes:
- Refer to the user manual of the device with which you are pairing to find out how to set this device to the mode allowing
this operation.
- The code of the remote device may be predefined by the device manufacturer. In this case, refer to the user manual of this
device to find out this code.
Car kit/Headset
This menu allows you to activate or deactivate the Automatic response option when the phone is connected to a pedestrian
kit or a car kit.
SyncML
Two selections:
- Network (OTA): you can synchronize your phonebook, your organizer or your ToDos with your archives stored in your
operator's network depending on the options offered by your operator with a GSM or GPRS connection from your phone.
- Local: you can synchronize your phonebook, your organizer or your ToDos with your archives stored in your computer.
Use the Wellphone software and configure your USB connection in your phone or activate Bluetooth

USB Mode

Data exchange between the phone and a PC with a USB cable connection
1 Data exchange between a memory card inserted in the phone and a PC
First you must select the USB key mode (see hereafter).
After connection of the USB cable between the phone and the PC, the memory card is considered as an additional memory
in the Windows explorer files directory; you can copy/paste.
2 Data exchange between the phone memory and a PC
First you must select the Modem mode (see hereafter).
After connection of the USB cable between the phone and the PC, you must use the MPAS software (My Pictures And Sounds
available on www.planetsagem.com) or the Wellphone software (available on www.wellphone.com).
Note: If a call comes in during an exchange of data with your PC, the link will be interrupted and will have to be manually
re-started.
Settings
®
services.
®
.
45