Installation Into The Back Of A Panel - Siemens MAG 1100 F Operating Instructions Manual

SITRANS F M
6.2.8
Installation into the back
of a panel
6. Installation of transmitter
1. Mount the SENSORPROM
The SENSORPROM unit is supplied with the sensor in the terminal box.
®
2. Mount the connection board into the back of the enclosure.
3. Connect the cables as shown under "Electrical connection", chapter 7.
4. Mount the enclosure into the back of a panel with four screws.
5. Insert the transmitter.
memory unit on the connection board as shown.
®
55