Transmitter Mag 6000 - Siemens MAG 1100 F Operating Instructions Manual

SITRANS F M
2.3 Sensor MAG 3100, MAG 3100 HT and MAG 3100 P
Type MAG 3100
Operating pressure
Operating pressure • Neoprene 0.01 ... 100 bar
[abs. bar] (maximum (0.15 ... 1450 psi)
operating pressure • EPDM 0.01 ... 40 bar (0.15 ... 580 psi)
decreases with • Linatex
increasing operating (0.15 ... 580 psi)
temperature and with • Ebonite 0.01 ... 100 bar
stainless steel flanges) (0.15 ... 1450 psi)
• PTFE
DN
0.3 ... 50 bar (4 ... 725 psi)
350
(14"
0.3 ... 40 bar (4 ... 580 psi)
• PFA
- DN 25 ... 100 (1" ... 4"):
Enclosure rating
Pressure drop at 3 m/s
Test pressure
Mechanical load • 18 ... 1000 Hz random in x, y, z, directions for 2 hours according to EN 60068-2-36
• Sensor: 3.17 grms
• Sensor with compact MAG 5000/6000 mounted transmitter: 3.17 grms
Temperature of medium • Neoprene 0 ... +70 °C (32 ... 158 °F)
• EPDM -10 ... +70 °C (14 ... 158 °F)
• Linatex
(-40 ... +158 °F) (for temperatures
below -20 °C (-4 °F) AISI 304 or 316
flanges must be used)
• Ebonite 0 ... 95 °C (32 ... 203 °F)
• PTFE -20 ... +100 °C (-4 ... +212 °F)
• PFA -20 ... +100 °C (-4 ... +212°F)
EMC
Design
Weight
Flange and housing
AISI 304 (1.4301) flanges and carbon steel housing, with corrosion-resistant two-component epoxy coating (min. 150 µm)
Measuring pipe material
14
2. Technical data
®
0.01 ... 40 bar
≤ (≤
300 12"):
≤ ≤ 600
DN
≤ ≤
DN 24"):
0.01 ... 50 bar (0.15 ... 725 psi)
Option: IP68/NEMA 6P to EN 60529, 10 mH
®
(rubber) -40 ... +70 °C
Carbon steel ASTM A 105, with material corrosion-resistant two-component epoxycoating (min. 150 µm)
(continued)
MAG 3100 HT (High Temperature)
• PTFE Teflon
- DN 15 ... 300 (½" ... 12")
(130/180 °C (266/356°F)):
0.6 ... 50 bar (9 ... 725 psi)
(180 °C (356 °F)
PTFE has factory-mounted grounding
SS rings type E & SS terminal box)
• PFA
- DN 25 ... 100 (1" ... 4"):
0.01 ... 50 bar (0.15 ... 725 psi)
IP67/NEMA 4X/6 to EN 60529, 1 m H
As straigth pipe
1.5 x PN (where applicable)
• PTFE -20 ... +130 °C (-4 ... +266 °F)
• PTFE -20 ... +180 °C (-4 ... +356 °F)
Factory-mounted grounding rings
type E and SS terminal box. Can only
be used with remote transmitter.
• PFA -20 ... +150 °C (-4 ... +300 °F)
89/336 ECC
See dimensional drawings
or
or
AISI 316 L (1.4404) flanges and housing, polished
AISI 304 (1.4301)
MAG 3100, MAG 3100 HT and MAG 3100 P
MAG 3100 P
• PTFE Teflon
- DN 15 ... 300 (½" ... 12") :
0.3 ... 40 bar (4 ... 580 psi)
• PFA
- DN 25 ... 100 (1" ... 4"):
0.01 ... 50 bar (0.15 ... 725 psi)
O for 30 min
2
O cont. (no ATEX)
2
• PTFE -20 ... +130 °C (-4 ... +266 °F)
• PFA -20 ... +150 °C (-4 ... +300 °F)