Mounting And Removing A Cutting Attachment; Mounting The Cutting Attachment; Removing The Cutting Attachment; Inserting And Removing The Battery - Stihl HSA 25 Instruction Manual

13 Mounting and Removing a Cutting Attachment

13 Mounting and Removing a Cutting
Attachment

13.1 Mounting the Cutting Attachment

WARNING
Make sure the battery is removed before starting assembly.
WARNING
Making contact with the cutters may result in serious cut
injuries, even if the cutting blades are not moving. @ 6.5.
Always wear heavy-duty work gloves when mounting or
otherwise handling the cutting blades, @ 6.4.
The grass blades and shrub blades are mounted to the
garden shears in the same way.
To mount the cutting blade:
► Switch off the garden shears, @ 15.2.
► Remove the battery, @ 14.2.
► Slide a blade scabbard over the cutting blades so that it
covers the entire cutting attachment.
1
1
2
2
► Insert the clips (1) of the cutting attachment into the
guides (2) on the garden shears.
► Move the other end of the cutting blade downward and
press firmly until you hear an audible click.
► Remove the blade scabbard (4).
0458-708-8621-A
3
4

13.2 Removing the Cutting Attachment

To remove the cutting attachment:
► Switch off the garden shears, @ 15.2.
► Remove the battery, @ 14.2.
► Slide a blade scabbard over the cutting blades so that it
covers the entire cutting attachment.
2
1
1
► Press down on the locking levers (1) to unlock cutting
attachment (2).
► Lift up to remove the cutting attachment.
NOTICE
A piece of foam (3) is designed to protect the gear from dirt
during operation. This piece of foam is firmly attached to the
garden shears and cannot be removed.

14 Inserting and Removing the Battery

14.1 Inserting the Battery

WARNING
Never use a malfunctioning, damaged, cracked, leaking or
deformed battery, @ 7. Use and store the battery only
within an ambient temperature range of 32 °F to 104 °F (0 °C
to 40 °C), @ 7.
English
3
21