Table of Contents
Advertisement
10. Connect all external cables and all power cords.
11. Reinstall the server cover (see "Installing the server cover and bezel" on
32
IBM xSeries 345 Type 8670: Option Installation Guide
6. Locate the battery (connector BH1) on the system board.
Battery
(BH1)
7. Remove the battery:
a. Use one finger to press the top of the battery clip away from the battery.
b. Lift and remove the battery from the socket.
8. Insert the new battery:
a. Use one finger to press the top of the battery clip away from the battery.
b. Press the battery into the socket until it clicks into place. Make sure the
battery clip holds the battery securely.
9. Reinstall the adapters that you removed, and reconnect the internal cables that
you disconnected.
page 33).
Advertisement
Table of Contents
