The following illustration shows how to install the second microprocessor on the
system board.
Note: Do not remove the first microprocessor from the system board to install the
second microprocessor.
Microprocessor
Complete the following steps to install an additional microprocessor:
1. Review the information in "Safety" on page v, and "Installation guidelines" on
page 9.
2. Turn off the server and disconnect all power cords and external cables (see
"Turning off the server" on page 12); then, remove the server cover (see
"Removing the cover and bezel" on page 13).
3. Remove the air baffle covering the microprocessor section of the system board
and set the air baffle aside.
Captive screws
Heat sink
VRM
Microprocessor
release lever
Chapter 2. Installing options
25