Other Connections; Connecting Auxiliary Components; Recording Mode - Pioneer S-DV131 Operating Instructions Manual

Other connections

Chapter 6
Other connections
Connecting auxiliary
components
This system has both stereo analog inputs and
outputs. Use these to connect external
components, such as your VCR, MD or CD-R
recorder.
1 Connect the LINE (AUDIO IN) jacks to the
analog outputs of an external playback
component.
Connect using RCA pin-plug stereo cables.
2 Connect the LINE (AUDIO OUT) jacks to
the analog inputs of an external recording
component.
These include components such as a cassette
deck, VCR, MD, or another recorder with
analog inputs. Connect using RCA pin-plug
stereo cables.
Tape deck, etc.
AUDIO
OUTPUT
T
C B /
P B
C /
R
L
P R
Y R
XV-DV131/232T
Note
1 • When Recording mode is on, most sound features cannot be used. The display will briefly blink REC MODE if you try and
use a prohibited function while Recording mode is on.
• When Recording mode is off, the audio from the LINE (AUDIO OUT) jacks may be interrupted, depending on the operation.
• The Recording mode switches off if you change the input function (DVD/CD, TUNER, etc.) or switch the power off.
AUDIO
INPUT
LINE
R L
FRONT
IN OUT
L
R
R L
SURROUND
AUDIO SPEAKERS

Recording mode

The Recording mode allows you to make
surround-compatible analog recordings from
the LINE (AUDIO OUT) jacks.
multichannel sources will be downmixed to
stereo for improved playback with systems that
can provide matrix-decoding (like Dolby Pro
Logic).
1 Press SOUND MODE .
2 Use (cursor left/right) to select REC
MODE then press ENTER .
3 Use (cursor up/down) to select
MODE ON or MODE OFF then press ENTER to
confirm.
• MODE ON – Multichannel sources are
downmixed to stereo for recording (the
same downmix is heard through the front
speakers and the subwoofer).
• MODE OFF – For regular multichannel
playback through your speaker system
(only the front left and right channels are
output from the line output).
06
1
Dolby
25
En