Ceiling-Mount Clips - Nortel AS-1200-BG-EXT Quick Installation Manual

Note: When the Nortel Networks WLAN - Access Point is powered up and is associated with an
Nortel Networks WLAN - Wireless Security Switch (Green/Power and Yellow/802.11b/g and/or
Yellow or Amber/802.11a LEDs lit), the Nortel Networks WLAN - Access Point is broadcasting
its beacon signal(s). When this happens, complete the installation as quickly as possible to
remove yourself from within 8 inches (20 cm) of the Nortel Networks WLAN - Access Point to
comply with FCC RF radiation exposure guidelines.
•
Slide the ceiling-mount base onto the drywall, sheet metal, or other screw heads until it snugs
into place.
You have installed the Nortel Networks WLAN - Access Point. Repeat
Networks WLAN - Access Points
continue with Step 5: Returning MAC

Ceiling-Mount Clips

When you are mounting the Nortel Networks WLAN - Access Point on the extruded aluminium rails of a
hanging ceiling, use the ceiling-mount clips to mount the Nortel Networks WLAN - Access Point as
shown in the following figure and as described below:
Figure -
Assembling the Nortel Networks WLAN - Access Point and Ceiling-Mount Clips
March 16, 2004
Step 4: Mounting the Nortel Networks WLAN - Access Points
for each Nortel Networks WLAN - Access Point location, and then
Information.
Ceiling-Mount Clips
Step 4: Mounting the Nortel
18