Ceiling Mount Base - Nortel AS-1200-BG-EXT Quick Installation Manual

Ceiling Mount Base

When you are mounting the Nortel Networks WLAN - Access Point in the middle of a ceiling (flat sides
toward the room or hallway), use the ceiling-mount base to mount the Nortel Networks WLAN - Access
Point as shown in the following figure and as described below:
Figure -
Assembling the Nortel Networks WLAN - Access Point and Ceiling-Mount Base
•
Copy the MAC address(es) from the label(s) on the Nortel Networks WLAN - Access Point onto
the corresponding location on the map. MAC addresses have the format 000B85xxxxxx.
•
Attach the ceiling-mount base to the bottom of the Nortel Networks WLAN - Access Point using
the factory-supplied machine screws and washers.
•
Position the ceiling-mount base so its keyhole slots are partly on the drywall, sheet metal, or
other screw heads installed in
Note: If the screws do not securely hold the ceiling-mount base, remove the Nortel Networks
WLAN - Access Point and adjust the screws until they hold the ceiling-mount base securely.
•
Attach the cables to the sides of the Nortel Networks WLAN - Access Point.
March 16, 2004
Step 4: Mounting the Nortel Networks WLAN - Access Points
Ceiling Mount Base
Step 3: Preparing Mounting Locations.
17