Focus; Front Surround; Listening To Audio From The Sub Screen Using Headphones - Pioneer PureVision PDP-427XG Operating Instructions Manual

Setting up

FOCUS

This shifts the apparent direction of the sound upward for more
clearly defined sound.
1 Press HOME MENU.
2 Select "Sound" ( then ENTER).
3 Select "FOCUS" ( ).
4 Select the desired parameter (
Sound STANDARD
Treble
Bass
Balance
Reset
FOCUS

Front Surround

Headphone Output
Sub Volume
FOCUS
Selections Off Deactivates FOCUS.
On Activates FOCUS.
5 Press HOME MENU to exit the menu.
Note
• You cannot set up the sound field for listening with
headphones.
• If you set up the sound field with headphones connected, the
new setting will become effective as soon as you disconnect
the headphones.
• The effect of this function differs depending on signals.
Front Surround
This provides three-dimensional sound effects and/or deep, rich
bass.
1 Press HOME MENU.
2 Select "Sound" ( then ENTER).
3 Select "Front Surround" (
4 Select the desired parameter (
Front Surround
Selections Off Deactivates both SRS and TruBass
SRS Reproduces highly effective three-dimensional
sound.
TruBass Provides deep, rich bass using a new
(default) technology.
TruBass + SRS Provides both TruBass and SRS effects.
5 Press HOME MENU to exit the menu.
).
2
0
0
Off
Off
Main
15
).
).
Note
• You cannot adjust the front surround effect for listening with
headphones.
• If you change the front surround effect with headphones
connected, the new setting will become effective as soon as
you disconnect the headphones.
(FRONT SURROUND) on the remote
• You can also press
to change the selection.
• (WOW) designates a status where the FOCUS is on and
TruBass + SRS has been selected for Front Surround.
• is a trademark of SRS Labs, Inc.
• WOW technology is incorporated under license from SRS
Labs, Inc.
• The effect of this function differs depending on signals.
Listening to audio from the sub screen
using headphones
With headphones connected, you can listen to audio coming from
the sub screen when in the 2-Screen or Picture in Picture mode;
audio coming from the main screen is output from the speakers.
1 Press HOME MENU.
2 Select "Sound" ( then ENTER).
3 Select "Headphone Output" (
4 Select the desired parameter (
FOCUS
Front Surround
Headphone Output
Sub Volume
Headphone Ouput
Selections Main Audio coming from the main screen is
output from the PHONES output terminal.
Sub When in the 2-screen or picture-in-picture
mode, audio coming from the sub screen is
output from the PHONES output terminal.
5 Select "Sub Volume" (
6 Select the desired volume level (
Front Surround
Headphone Output
Sub Volume
7 Press HOME MENU to exit the menu.
Note
• To adjust the volume for headphones after selecting "Sub",
always use "Sub Volume" from the menu, whether the screen
is in single, 2-picture or picture-in-picture mode. When the
screen is in single mode with "Sub" selected, audio coming
from the screen is output from the speakers even with
headphones connected.
).
).
Off
Off
Main
15
).
).
Off
Sub
15
08
33
En