Omron SYSMAC C200HS Operation Manual page 421

Host Link Commands
11-3-17 SV READ 3 –– R%
Command Format
1 0
@ x 10 x 10 R
Node no. Header
code
Response Format
1 0
@ x 10 x 10 R
Node no. Header
code
Parameters
416
Reads the constant SV or the word address where the SV is stored. The SV that
is read is a 4-digit decimal number (BCD) written in the second word of the TIM,
TIMH(15), CNT, CNTR(12), or TTIM(87) instruction at the specified program ad-
dress in the user's program. With this command, program addresses can be
specified for a program of 10K or more.
5 4 3 2
% x 10 x 10 x 10 x 10
Program
address
Must be "0"
1 0
% x 16 x 16 OP1 OP2 OP3 OP4
End code Operand
Name, TC Number (Command)
Specify the name of the instruction for reading the SV in "Name". Make this set-
ting in 4 characters. In "TC number", specify the timer/counter number used by
the instruction.
Instruction name
OP1 OP2
T I
T I
C N
C N
T T
(S): Space
Operand, SV (Response)
The name that indicates the SV classification is returned to "Operand", and ei-
ther the word address where the SV is stored or the constant SV is returned to
"SV".
Operand
OP1 OP2
C I
L R
H R
A R
D M
D M
C O
Note The instruction name specified under "Name" must be in four characters. Fill any
gaps with spaces to make a total of four characters.
1 0
OP1 OP2 OP3
x 10 x 10
Name
3 2
x 10 x 10 x 10
SV
OP3 OP4
M (S) TIMER
M H HIGH-SPEED TIMER
T (S) COUNTER
T R REVERSIBLE COUNTER
I M TOTALIZING TIMER
Classification
OP3 OP4
O (S) IR or SR
(S) (S) LR
(S) (S) HR
(S) (S) AR
(S) (S) DM
:
(S) DM (indirect)
N (S) Constant
Section 11-3
3 2 1
OP4
x 10 x 10 x 10 x 10
Timer/counter
(0000 to 0511)
: ↵
FCS Terminator
:
1 0
x 10
FCS Terminator
Classification TC number
0000 to 0511
Constant or
word address d dd
0000 to 0511
0000 to 0063
0000 to 0099
0000 to 0027
0000 to 6655
0000 to 6655
0000 to 9999
0
↵
range