Table of Contents
Advertisement
Sleep
Description:
Stops program execution for a specific amount of time.
Syntax:
SLEEP(tick%)
Comments:
tick% is the amount of time to wait, where each tick represents 1/32 of a
second.
Example:
0100 SLEEP(20)
Temperature
Description:
Returns the temperature of a zone of the Five Zone Temperature Controller.
Syntax:
temp = TEMPS(zone)
Comment:
zone is zone 1 through 5 of the controller
temp is the floating point temperature of the zone
Example:
0100 IF TEMPS(1) > 280.0 THEN
0200 : STOP(0)
Aborts the analysis if the temperature gets too high.
2000-OSM, F1
10-47
Advertisement
Table of Contents
Troubleshooting
