Software Configuration Identification; How To Order - ABB PGC2000 Operation And Service Manual

Software Configuration Identification

The software configuration appears at the top of the Background screen just below "ABB
Analytical GCC." In Figure 9-2 the software configuration is 803V029-1G.
Software
Configuration

How to Order

Please contact your local ABB sales or service representative for specific instructions on ordering
parts. Always include the information listed in Equipment Identification and Configuration
Identification in your request.
The remainder of this section lists the replaceable parts and components by their location in the
equipment. Part numbers and drawing numbers listed here are for identification purposes only.
When you order parts for replacement, use the list of parts included in the Engineering Data Package
provided with your equipment to ensure you have the correct version of each part.
2000-OSM, F1
** B A C K
ABB Analytical GCC
803V029-1R (Std GCC)
**ALARM**
**ALARM** 18-JUN-2002
**ALARM**
Analysis Time :00114
Cycle Time :00000
Current Stream :01
Purging Stream :01
Exit Manual
To Control
Commands
F1 F2
Figure 9-2. BACKGROUND SCREEN
G R O U N D
Remote 0.1
(C)
TUE 08:16:01
Peaks Found : 00
State : Idle
Key Component:
none
entered
Cur Report,
Basic I/O &
Options
F3
**
2001
Alarms
F4
9-2