Getting started
04
Using the built-in TV tuner
Changing TV channels
There are three different ways to select TV channels. Note
that you can't change the TV channel during playback,
recording or during recording standby.
• CH +/– buttons on the remote
• Number buttons on the remote – For example, to
select channel 4, press 4 then ENTER; for channel 34,
press 3, 4, ENTER.
• +/– buttons on the front panel
Changing audio channels
You can change the audio channel of the broadcast or
external input signal.
•
Press AUDIO to change the audio.
The current audio channel is displayed on-screen.
• If the NICAM audio setting (see Nicam Select on
page 93) is set to NICAM and you are watching a
NICAM broadcast, you can switch between NICAM
and Regular (non-NICAM) audio.
Note
1. Channel presets are numbered 1–99.
28
En
HDD
DVD
CH
ENTER
1
AUDIO
NICAM
Regular
• If the NICAM broadcast is bilingual, you can also
select the language.
NICAM A
Regular
• You can also select the language for a non-NICAM
bilingual broadcast.
A (L)
A + B (L+R)
• When watching a recording made from an external
input with Bilingual recording selected (see External
Audio on page 94), you can switch the audio channel
between left (L), right (R) or both (L+R).
L
L+R
Tip
• When recording to the HDD with HDD Recording
Format set to Video Mode On, to DVD in Video mode,
or on the LPCM setting, only one channel of a
bilingual broadcast is recorded. In this case, decide
which language you want to record before recording
by setting the Bilingual Recording setting (see
Bilingual Recording on page 94).
NICAM B
NICAM A+B
B (R)
R