Connecting To A Cable Box Or Satellite Receiver (2) - Pioneer DVR-530H-S Operating Instructions Manual

Connecting up
02

Connecting to a cable box or satellite receiver (2)

If many or all the channels you receive by cable or satellite are scrambled, we recommend using this setup.
Using the setup on this page you can:
• Record any channel by selecting it on the cable box/satellite receiver.
• Record using the Auto Start Recording feature (see Automatic recording from a satellite tuner on page 46).
Important
• Do not connect this recorder 'through' your VCR, satellite receiver or cable box. Always connect each component
directly to your TV or AV amp/receiver.
1 Connect RF antenna cables as shown.
This enables you to watch and record TV channels.
2 Connect the AUDIO and VIDEO OUTPUT jacks (1
or 2) on this recorder to a set of audio/video inputs
on your TV using a set of A/V cables (as supplied).
This enables you to watch discs.
Note
1. • The setup on this page does not allow you to watch one channel and record another.
• The diagram shows standard video connections, but you can alternatively use the S-video or component video connections if they're avail-
able.
16
En
AUDIO/VIDEO
INPUT
2
TV
INPUT 1/
AUTO START REC
R L
AC IN
CONTROL
IN OPTICAL
AUDIO
DIGITAL OUT
3
AUDIO/VIDEO
OUTPUT
1
Antenna/cable TV
wall outlet
ANTENNA
IN
ANTENNA
1
ANTENNA
OUTPUT 1
Y P
R L B
IN OUT
COMPONENT
VIDEO OUT
P
VIDEO AUDIO VIDEO R
S-VIDEO S-VIDEO
INPUT 3 OUTPUT 2
ANTENNA
IN (RF IN)
1
ANTENNA
OUT
Cable box/
Satellite receiver
ANTENNA
IN
3 Connect the audio/video output of your cable
box/satellite receiver to the INPUT jacks on this
recorder using a set of A/V cables.
This enables you to record scrambled TV channels.
1
OUT