Display - Pioneer DVR-320 Operating Instructions Manual

Controls and displays

Display

1 2
1 PLAY
Lights during playback; blinks when paused.
2 REC
Lights during recording; blinks when recording is
paused.
3 PL (page 59, 64)
Lights when a VR mode disc is loaded and the recorder is
in Play List mode.
4 2 3 (page 79)
Shows the remote control mode (if nothing is displayed,
the remote control mode is 1).
5 REM
Lights when the character display is showing the
remaining available recording time.
6 V
Lights when an unfinalized Video mode disc is loaded.
7 R / RW
Indicates the type of recordable DVD loaded: DVD-R or
DVD-RW.
8
(page 47)
Lights when a timer recording has been set.
(Indicator blinks if the timer has been set but there
isn't a recordable disc loaded.)
AUTO (page 54)
Lights when Auto Start Recording has been set, and
during Auto Start Recording.
3 4
10
5 6 7
11
9 Recording quality indicators (page 44)
FINE
Lights when the recording mode is set to FINE (best
quality).
SP
Lights when the recording mode is set to SP
(standard play).
LP
Lights when the recording mode is set to LP (long
play).
EP
Lights when the recording mode is set to EP
(extended play).
MN
Lights when the recording mode is set to MN
(manual recording level) mode.
10 Character display
11 (page 84)
Indicates which channels of a bilingual broadcast
are recorded.
12 VPS / PDC (page 47)
Lights when receiving a VPS/PDC broadcast during a
VPS/PDC-enabled timer recording.
13 NTSC
Lights when playing NTSC format video.
14 OVER (page 84)
Lights when the analog audio input level is too high.
8 9
12 13 14
03
22
En