Pioneer DVR-320 Operating Instructions Manual page 51

Recording
• Use the and buttons to switch VPS/PDC On
or Off.
2 After making the settings, press ENTER.
The program details are shown at the bottom of the
screen for a few seconds then the screen is automatically
exited.
• If you haven't set up the guide channels (or at least
the guide channel for the PlusCode programming
number that you entered), the recorder will prompt
you to enter the channel number that the TV program
is showing on.
Tip
• You can check the timer program settings by
pressing TIMER REC to display the timer recording
screen.
VIDEO Plus+ programming with the power
off
You can enter a PlusCode programming number when
the recorder is in standby.
VIDEO Plus+
PREV NEXT
Important
• You can't use this feature until you have set up the
guide channels. See Set VIDEO Plus+ CH on page 81.
• You can't change the recording mode.
• You can't program daily or weekly timer recordings.
CLEAR
ENTER
1 Press 'VIDEO Plus+'.
The front panel display shows the current recording
mode and prompts you to enter the PlusCode
programming number.
P L US CODE
2 Use the number buttons to enter the PlusCode
programming number.
• To clear the last digit entered, press CLEAR.
• Use the PREV NEXT
PDC on/off. With VPS/PDC on, the front panel VPS/
PDC indicator lights. (Note that a maximum of 8
timer recordings can be set with VPS/PDC on.)
3 Press ENTER.
The display shows the timer settings:
Date Start time End time
• If CODE ERROR appears in the display, check that
the PlusCode programming number is correct and
that the guide channel is set (see Set VIDEO Plus+
CH on page 81), then set the timer recording again.
• If CAN'T SET appears in the display, it means that
although you entered a valid PlusCode programming
number, the program has already finished.
Extending a timer recording in progress
You can extend a timer recording beyond the
programmed end time in two different ways. This can be
useful if a broadcast program overruns, for example.
HOME
MENU
PREV NEXT
REC STOP REC
2 9 32 4
button to switch VPS/
Recording channel.
CLEAR
ENTER
TIMER REC
06
51
En