Initialize Settings; Finalize Settings - Pioneer DVR-320 Operating Instructions Manual

The Disc Setup menu
Lock Disc.
VR mode
• Default setting: Off
Disc Setup
Basic Input Disc Name
Initialize Lock Disc
Finalize
Set to On to prevent accidental recording, editing or
erasing of the disc loaded. If you need to unlock the disc
to make edits, select Off.
Important
• A locked disc can still be initialized (which will
completely erase the disc).
Note
• You cannot change the lock setting for a disc if the TV
line system of the disc is different to the current
setting of the recorder. See Input Line System on
page 78 for how to change the recorder's setting.

Initialize settings

DVD-RW
You can initialize a DVD-RW disc for either VR mode
recording or Video mode recording. The first time you
load a new DVD-RW disc, it will be automatically
initialized for recording according to the DVD-RW Auto
Init. setting in the Initial Setup menu (see page 88).
The initialize menu here lets you reinitialize a disc, for
example if you want to change the recording format of
the disc. See Initializing a DVD-RW disc on page 57 for
detailed instructions.
On
Off

Finalize settings

Finalize
DVD-R DVD-RW
Finalizing 'fixes' the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
See Playing your recordings on other DVD players on
page 56 for detailed instructions.
Undo Finalize
DVD-RW
You can undo the finalization on DVD-RW discs recorded
on this recorder in Video mode. You need to do this if you
want to record more material or edit material already on
the disc.
You can also undo the finalization of VR mode discs
which have been finalized on other DVD recorders. If
when you load a disc the message This disc cannot be
recorded. Undo the finalization is displayed, use this
command to be able to record on the disc using this
recorder.
1 From the Disc Setup menu, select 'Finalize', then
'Undo Finalize' from the finalize options.
2 Select 'Start'.
Note
• You cannot finalize a disc or use the Undo Finalize
command if the TV line system of the disc is different
to the current setting of the recorder. See Input Line
System on page 78 for how to change the recorder's
setting.
10
73
En