Pioneer VRD1160-A Operating Instructions Manual page 71

Additional Information
Problem
No picture/No color.
Screen is stretched or aspect
does not change.
Picture disturbance during
playback or the picture is dark.
No audio, or audio is dis-
torted.
Cause / Remedy
• Check that the VIDEO OFF indicator is not lit. If it is, press the
VIDEO OFF button (page 16).
• Incorrect video connections: Check that connections are
correct and that plugs are inserted fully. Also check the video
cable for damage.
• TV/monitor or AV amplifier settings are incorrect: Check the
instruction manual of the connected equipment.
• The TV Screen setting in the Initial Settings menu is incorrect.
See page 65 for how to set it correctly for your TV/monitor.
• If your TV/monitor is connected using an S-video cable, try
changing the S-Video Out setting (page 52).
• This player is compatible with Macro-Vision System copy
guard. Some discs include a copy prevention signal, and when
this type of disc is played back, stripes etc., may appear on some
sections of the picture depending on the TV. This is not a
malfunction.
• Due to the player's copy protection circuits, connection of this
device through a VCR or an AV selector may prevent recording or
cause picture problems. This is not a malfunction.
• The TV system may be set inappropriately. See Setting the TV
System on page 20.
• No audio is output during slow motion playback or when
scanning discs other than audio CDs
• Some DVD discs do not output digital audio: Switch your
amplifier to the player's analog outputs.
• Check that the disc is free from dust and dirt, and that it is not
damaged (page 63).
• Check that all interconnects are firmly inserted.
• Check that the plugs and terminals are free of dirt, oxide, etc.
and clean if necessary. Also check the cable for damage.
• Make sure the player's output is not connected to the
amplifier's phono (turntable) inputs.
• Check your amplifier/receiver's settings (volume, input
function, speaker settings, etc.).
09
71
En