08
The Initial Settings Menu
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
You can set the individual channel levels
between –6dB and +6dB using the test tone
output as a guide to set the correct levels.
Adjust the levels until the output level from
all channels sounds the same from your
usual listening position.
Automatic: Select Auto to start the test tone
output.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
As the test tone plays through each speaker
in turn, it is highlighted on-screen. Use the
/
(cursor up/down) buttons to adjust the
channel output level of the current speaker.
Note that the test tone is not output from the
subwoofer. Press
test tone sequence, or ENTER to save the
settings and exit the channel level setting
screen.
Manual: Use the
buttons to select a speaker.
62
En
Auto
0.0dB
L
C
0.0dB
R
0.0dB
0.0dB
RS
0.0dB
LS
SW
0.0dB
Auto
L
0.0dB
0.0dB
C
0.0dB
R
0.0dB
RS
0.0dB
LS
SW
0.0dB
(cursor left) to exit the
/
(cursor up/down)
Initial Settings
Auto
Digital Audio Out
Video Output
L
0.0dB
Language
0.0dB
C
0.0dB
R
Display
0.0dB
RS
Options
LS
0.0dB
Speakers
0.0dB
SW
Press
(cursor right) then use the
(cursor up/down) buttons to set the channel
output level.
Initial Settings
Auto
Digital Audio Out
Video Output
0.0dB
L
Language
C
0.0dB
R
0.0dB
Display
0.0dB
RS
Options
0.0dB
LS
Speakers
0.0dB
SW
To turn the test tone on/off for an individual
speaker, press
(cursor right). The test tone
continues playing even when you select a
different speaker.
Initial Settings
Auto
Digital Audio Out
Video Output
0.0dB
L
Language
0.0dB
C
0.0dB
R
Display
RS
0.0dB
Options
0.0dB
LS
Speakers
0.0dB
SW
Press ENTER to save the settings and exit the
channel level setting screen.
/